TECHNICAL DATA 

AUTOMA AE20
CLOSING UNIT

AE20
Clamping force  Kn 200
Stroke mm 250 x 2
Maximum daylight mm 800
Minimum daylight mm 300
Dimensions between the columns (length x height) mm 500 x 555
Maximum closing speed mm/sec. 600

EXTRUDERS

E 70-24

E80-24
Revolutions per minute rpm. 5-86 8-95
Maximum output in HDPE kg./h. 85 165
Heating power kW 144 15.6
Extruder motor power kW 31.1 54
ACCUMULATOR HEADS
Accumulator capacity PE-Kg. 2 3
Maximum accumulator volume Lt. 3.37 4.12
Head tooling min diameter mm. 30 30
Head tooling max diameter mm. 220 220
Heating power kW. 14 15.2
Thermo regulating zone Nš. 4 4
LAY-OUT AE20 - GENERAL (indicative)
Total installed power kW 102
Average electric consumption (80%) kW 82
Indicative air consumption (excluding cooling air) mc/h 20
Hydraulic/Oil/Head/Gripper cooling requirement Kcal/h. 15.000
Mould cooling Kcal/h. 25.000
Machine dimensions width/length/height Mt. 5.40/2.28/4.15
Total weight kg. 13.200