TECHNICAL DATA 

AUTOMA AE30
CLOSING UNIT

AE30
Clamping force  Kn 350
Stroke mm 300 x 2
Maximum daylight mm 1000
Minimum daylight mm 400
Dimensions between the columns (length x height) mm 610x9.10
Maximum closing speed mm/sec. 600

EXTRUDERS

E 80-24

E90-24
Revolutions per minute rpm. 5-95 5-90
Maximum output in HDPE kg./h. 165 215
Heating power kW 15.6 21.5
Extruder motor power kW 54 65
ACCUMULATOR HEADS
Accumulator capacity PE-Kg. 3 4 6 8
Maximum accumulator volume Lt. 4.12 5.5 8.22 10.8
Head tooling min diameter mm. 30 30 30 30
Head tooling max diameter mm. 220 300 300 300
Heating power kW. 15.2 16.8 18.5 22
Thermo regulating zone Nš. 4 6 6 8
LAY-OUT AE30 - GENERAL (indicative)
Total installed power kW 157
Average electric consumption (80%) kW 125
Indicative air consumption (excluding cooling air) mc/h 25
Hydraulic/Oil/Head/Gripper cooling requirement Kcal/h. 20.000
Mould cooling Kcal/h. 36.000
Machine dimensions width/length/height Mt. 6.20/3.54/4.20
Total weight kg. 18.000