TECHNICAL DATA 

AUTOMA AE50
CLOSING UNIT

AE50
Clamping force  Kn 500
Stroke mm 400x2
Maximum daylight mm 1200
Minimum daylight mm 400
Dimensions between the columns (length x height) mm 800x1200
Maximum closing speed mm/sec. 500

EXTRUDERS

 E 80-24 E 90-24 E 100-24
Revolutions per minute rpm. 5-95 5-90 5-80
Maximum output in HDPE kg./h. 165 215 280
Heating power kW 15.6 21.5 32.4
Extruder motor power kW 54 65 90
ACCUMULATOR HEADS
Accumulator capacity PE-Kg. 6 8 8 10 12
Maximum accumulator volume Lt. 8.22 10.8 11.2 13.7 16.5
Head tooling min diameter mm. 30 30 50 50 50
Head tooling max diameter mm. 300 300 400 400 400
Heating power kW. 18.5 22 28.6 31.8 37.4
Thermo regulating zone Nš. 6 8 8 8 8
LAY-OUT AE50 - GENERAL  (indicative)
Total installed power kW 172
Average electric consumption (80%) kW 137
Indicative air consumption (excluding cooling air) mc/h 35
Hydraulic/Oil/Head/Gripper cooling requirement Kcal/h. 25.000
Mould cooling Kcal/h. 45.000
Machine dimensions width/length/height Mt. 6.80/3.57/5.25
Total weight kg. 26.000