|
TECHNICAL DATA AUTOMA NSB50 S |
||
| GENERAL |
NSB50 S |
|
| Screw diameter | mm | 54 |
| Screw speed | rpm | 0 ÷ 120 |
| Injection capacity | cm3 | 300 |
| Injection barrel heating bands | kW | 12 |
| Injection mould clamping force | tons | 50 |
| Injection mould opening stroke | mm | 510 |
| Hot runner heating power | kW | 6 |
| Mould chilling power required (approx) | kcal/h | 15.000 |
| Chilled water inlet temperature | °c | 10 ÷ 15 |
| Preform heating device | kW | 4 |
| Total installed power | kW | 54 |
| Blowing mould clamping force | tons | 40 |
| Blowing mould opening stroke | mm | 220 |
| Maximum blowing air pressure | bar | 40 |
| Operational air pressure | bar | 6 ÷ 10 |
| Operational air supply | NI/min | 560 |
| Hydraulic pack pump motor | kW | 30 |
| Operating hydraulic pressure | bar | 110 |
| Oil tank capacity | litre | 210 |
| Oil refrigeration power required (approx.) | kcal/h | 18.000 |
| Refrigeration water inlet temperature | °c | 20 ÷ 30 |
| (*) 1 Ton = 981 daN - (**) Data referred to a four cavity mould, 1 litre container, 15 second cycle - (***) 50Hz. For more detailed information please refer to the owners manual, prepared to the new "CE" standards and the blow moulding manufacturers specifications. | ||
|
NSB50 S |
Approx capacity cc. |
Number of cavities |
Max. neck diam. (A) mm |
Max. body diam. (B) mm |
|
|
5000 | 2 | 45 | 170 |
| 3000 | 2 | 45 | 130 | |
| 2000 | 3 | 40 | 120 | |
| 1500 | 4 | 34 | 105 | |
| 1000 | 5 | 28 | 85 | |
| 500 | 6 | 28 | 70 | |
| 500 | 7 | 28 | 58 | |
| 250 | 8 | 24 | 50 | |
| 50 | 10 | 20 | 40 | |
| 30 | 12 | 16 | 33 | |
|
|
2 | 80 | 130 | |
| 3 | 65 | 120 | ||
| 4 | 60 | 105 | ||
| 5 | 50 | 85 | ||
| 6 | 40 | 70 | ||
| 7 | 34 | 58 | ||
| 8 | 30 | 50 | ||
